| |
1) Start out by opening up the
Black Tote Case and removing and separating the contents in neatly arranged groupings of like
items for easy access to assembly. After putting like items together, you're ready to make a
quick inventory to ensure you'll have the correct equipment parts to assemble the game.
2) Inventory the Parts after they are
laid out neatly for easy viewing. You Should have:
- 4 each - Frame Joint Connectors of which 2 are
the Top "L" Joint
Connectors and 2 are the Bottom Joint Connectors.
- 12 - Frame Tubes of which 4 are short Blue
Leg Tube Sections and 8 are Red
and White Frame Tube Sections.
- 1 - Vinyl Backdrop Canvas with sewn-in Hook 'n' Loop
("Velcro") Straps.
- Balls, Pucks, & Sticks vary between games.
- After Inventorying items ,
you're ready to assemble the game.
|
3) Put all the
Red and White Tubes into groups of pairs, Join each pair together with the
White Ends facing out at each pair and the Red sides facing inward towards each other. (See Figure 2)
Figure 2
4) Build the Bottom of the Frame First. Start by laying one of your assembled
Red/White Tube pairs flat one the ground. (See Figure 3)
5) Attach the two
Bottom Joint Connectors to each end as shown with the white ends of Joints facing in toward each other. (See
Figure 3)
Figure 3
6) Tighten the
Eye Bolts attached to the Joint Connecters securely to the
Red/White Bottom Tube.
(See Figures 3 & 4)
7) Continue building the
Bottom of Game Frame by sliding in all 4 of the Blue Leg Sections
(Blue in
Blue) to the
Bottom Joint Connectors (See Figure 3) then secure each leg to
Joint Connectors with the attached Eye Bolts. (See Figure 4)
8)
Now you are ready to slide the Vertical Upright Side Tubes into the white openings left over in each of the two
Bottom Joint Connectors. The Vertical Tubes to be inserted upright are the
Red/White Frame Tube Pairs in which you've previously assembled.
Secure them with the Eye Bolts provided.
9) Place both "L" Brace Joint Connectors on the tops of each
Red/White Vertical Side Bar facing in toward each other. Do not
fasten Eye Bolt yet. Frame Tubes must remain loose enough to slide in last
Red/White Frame Tube Pair across the top horizontally.
10)
Slide in one end at a time across the Top of Game Frame into each of the two
"L" Joints. Tighten Eye Bolts in the "L" Joints to
the Red/White Top Tube. (See Figure 4)
You are now ready
to Put on the Canvas Backdrop. GO
>
Figure 4 |
